Start with the right connections
The Pilot II is a portable DAC with a USB-C termination and a 4.4mm balanced jack. To connect it to your phone, use a standard USB-C cable or the included Lightning converter if your phone has a Lightning port. Once connected, plug your IEMs into the 4.4mm balanced output using a compatible 4.4mm balanced cable.
Before you listen, check that your IEM cable is terminated with a 4.4mm balanced plug. The Pilot II does not have other headphone outputs, so a 4.4mm balanced cable is required to use the balanced output.
Pilot II connections at a glance
- Pilot II - 4.4mm Portable DAC: USB-C Termination This is the digital input that connects the DAC to your phone or computer.

Pilot II - 4.4mm Portable DAC - Pilot II - 4.4mm Portable DAC: 4.4mm Balanced Jack Your IEMs must use a 4.4mm balanced cable to plug into this output.
- Pilot II - 4.4mm Portable DAC: Use with standard USB-C or included lightning converter. Confirms you can connect to both USB-C and Lightning phones without extra adapters.
Setting up the Pilot II with your phone and IEMs
Follow these steps to get a stable connection and the correct output.
- Connect the DAC to your phone: Plug the USB-C end of the Pilot II into your phone’s USB-C port, or use the included Lightning converter if your phone uses Lightning.
- Attach your 4.4mm balanced IEM cable: Connect your IEMs to the 4.4mm balanced jack on the Pilot II. Make sure the cable is fully seated.
- Check the LED indicator: The LED shows the audio format: Blue for idle or SD audio at or below 48kHz, Red for HD audio above 48kHz, and Magenta for MQA content.
- Adjust output with the boost toggle: Use the boost toggle button to switch to variable output if you need more volume or a different gain setting for your IEMs.
Pairing the Pilot II with 4.4mm balanced IEM cables
The Pilot II’s 4.4mm balanced output is designed for IEMs and headphones that use a 4.4mm balanced connection. If your current IEM cable has a different plug, you’ll need a 4.4mm balanced cable to use this output. Many Campfire Audio IEMs are available with balanced cable options, but check the specific cable termination before ordering.
A balanced connection can offer more power and a lower noise floor, but the actual benefit depends on your IEMs and listening environment. The Pilot II uses the ESS Sabre 9281AC Pro DAC, which is intended to deliver clarity and detail. We can’t promise a specific audible improvement, but the balanced output is a genuine feature you can use with compatible cables.
Using the LED indicator and boost toggle
The Pilot II gives you visual feedback and a simple way to adjust output.
- Blue LED: Indicates idle or SD audio with a sample rate of 48kHz or lower.
- Red LED: Indicates HD audio with a sample rate above 48kHz.
- Magenta LED: Indicates MQA content.
- Boost toggle: Press to toggle variable output, which can help match the Pilot II to your IEMs’ sensitivity.
Taking the Pilot II on the road
The Pilot II’s aluminum enclosure and compact size make it a practical travel companion. Pack a short USB-C cable and your 4.4mm balanced IEM cable so you can connect quickly in a hotel, café, or on a flight. The included Lightning converter means you can switch between USB-C and Lightning phones without carrying a separate adapter.
There are no supplied care or safety instructions for the Pilot II, so treat it like any portable electronic device: avoid drops, moisture, and extreme temperatures. When packing, coil cables loosely to prevent strain on the connectors.
Pilot II features that matter for setup
- Pilot II - 4.4mm Portable DAC: ESS Sabre 9281AC Pro DAC The DAC chip is the core of the Pilot II’s digital-to-analog conversion.
- Pilot II - 4.4mm Portable DAC: Aluminum Enclosure A sturdy housing helps protect the DAC during travel.
- Pilot II - 4.4mm Portable DAC: LED Indicator Shows the current audio format so you can confirm your source is sending the expected signal.


